Hongrijia Depurate Facility Science & Technology Co., Ltd.
Hongrijia Depurate Facility Science & Technology Co., Ltd.
Add to Cart
WHY NEED Compressed Air Filter?
Compressed air systems contains much contaminants, such as solid particles (include dirt, rust and pipe scale), compressor lubricants, condensed water droplets,
water mist, oil mist, and hydrocarbon vapors. These contaminant plug orifices of sensitive pneumatic instrumentation, wear out seals, erode system, reduce the
absorptive capacity of desiccant air/gas dehydrator, foul heat transfer surfaces, reduce air tool efficiency, and damage finished products. Water left in air lines can
freeze during exposure to cold temperature, blocking flow or rupturing pipes. Compressor lubricant not captured in a coalescing filter will eventually collect in
pneumatic components, causing premature component failure, requiring repair or replacement.
Contaminated compressed air systems increase operating costs by reducing efficiency. This results in damaged pneumatic equipment, higher maintenance and
repair costs, reduced production(due to downtime), and increased product rejections.
PRODUCT ADVANTAGE
* The Filter Element adopts imported advanced filter materials and stainless steel support net to prevent secondary pollution and the particle interception effect is more than 99%.
* The shell is made of aluminum alloy by die-casting and has a compact structure to ensure safe use.
* All shells are cleaned, degreased and specially anti-corrosion treated before spraying to improve durability and can be applied to offshore platform operations.
* Unique lock design,to ensure easy for maintenance and air tightness
* The parallel connection of the body can reduce the installation and maintenance space.
* The precise threaded interface makes installation and maintenance easier and more convenient.
* The body is under a pressure of 3.2Mpa and withstands 96 hours, and the maximum burst pressure is 10.5Mpa. The Max. pressure is 1.6Mpa.
* Under the working condition of 1.5-80 ºC and 1.0MPa pressure, the body is guaranteed to be used for 15 years, and the service life of the filter element is 6000-8000 hours.
TECHNICAL SPECIFICATION
The flow rate below is the treatment capacity of compressed air under rated working pressure 7barg(100psig). For the applicatiion in other working pressure,
please refer to the correction factors.
| Model | Connection | Flow rates | Dimension(mm) | ||||||
| L/S | m³/min | scfm | Width | Depth | Height | A | B | ||
| HFD010 | RC1/2'' | 16.7 | 1.0 | 35.3 | 90 | 82 | 255 | 37 | 179 |
| HFD020 | RC3/4'' | 25.0 | 1.5 | 53.0 | 90 | 82 | 255 | 37 | 179 |
| HFD030 | RC3/4'' | 30.0 | 1.8 | 63.6 | 90 | 82 | 286 | 37 | 212 |
| HFD040 | RC1'' | 33.3 | 2.0 | 70.6 | 90 | 82 | 286 | 37 | 212 |
| HFD050 | RC3/4'' | 46.7 | 2.8 | 98.9 | 120 | 113 | 359 | 53 | 269 |
| HFD060 | RC1'' | 60.0 | 3.6 | 127.1 | 120 | 113 | 359 | 53 | 269 |
| HFD070 | RC1'' | 80.0 | 4.8 | 169.5 | 120 | 113 | 459 | 53 | 369 |
| HFD080 | RC1-1/2'' | 120.0 | 7.2 | 254.2 | 120 | 113 | 459 | 53 | 369 |
| Pressure | Barg | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| Psig | 15 | 29 | 44 | 59 | 73 | 87 | 100 | 116 | 131 | 145 | 160 | 174 | 189 | 203 | 219 | 232 | |
| Correction factor | 0.38 | 0.53 | 0.65 | 0.76 | 0385 | 0.93 | 1.00 | 1.07 | 1.13 | 1.19 | 1.23 | 1.31 | 1.36 | 1.41 | 1.46 | 1.51 | |
ELEMENT FILTRATION
Products are tested with the international advanced testing equipment based on standard ISO12500, which is equivalent to the standard ISO8573.
| Grade | Particle removal | Outlet oil aerosol concentration | Filtration performance of Particle | Filtration performance of oil | Element spanlife | Airflow direction | Preceed with |
| PF | 5μm | 5mg/m³ | - | 50% | 6000 hours | From inside to outside | Before refrigerated dryer |
| AO | 1μm | 0.6mg/m³ | 99.999+% | 80+% | 6000 hours | after air dryer | |
| AA | 0.01μm | <0.01mg/m³ | 99.999+% | 99.9+% | 6000 hours | after AO | |
| AX | 0.01μm | <0.001mg/m³ | 99.999+% | 99.99+% | 6000 hours | after AA | |
| ACS | - | <0.004mg/m³ | 99.999+% | - | 2000-3000 hours | before AX | |
| AR | 1μm | - | 99.999+% | - | 4000-6000 hours | From outside to inside | after desiccant dryer |
| AAR | 0.01μm | - | 99.999+% | - | 4000-6000 hours | after AR |
FACTORY & FACILITIES
CERTIFICATES & PATENTS
YUKA has more than 24 years of professional manufacturing, with trading experiences in compressed air
purification & separation industry to service our brand customers like below.
YUKA Attended Exhibitions in Shanghai Comvac Asia & Germany Hannover Messe:
Package & Shipping
Packing: Good packing will protect the goods from damage during transport. We use strong, durable packing material to pack the goods.
Shipping: By air, by sea ,by international express
Q6. what's the delivery way?
shipping way: air freight, express, sea
Q7. Could you Calculate the shipping cost for me?
Yes, we are honored to do that for you! Before the freight , please well let us know which seaport or airport near your place.